Today Deals
PIC16C57-C(PIC Microcontroller)
₨200.00
Bestsellers
-
Arduino
Adafruit HUZZAH32-ESP32
A feature-rich MCU with integrated Wi-Fi and
Bluetooth connectivity for a wide-range
of applications- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth (classic and BLE)
- 4 MByte flash include in the WROOM32 module
SKU: 5487FB8/24 -
Printers
2SC2782 VHF BAND POWER AMPLIFIER
Specifications:
- Rise Fall time: ns
- Max input current: mA
- Input voltage: +5VDC ±0.5VDC
- OSC series oscillators fit into a 14-pin DIP socket P/N 676385, below left
- Frequency stability ±100ppm
- Operating temperature: 0°C to 70°C Output load TTL: 10 TTL max.
SKU: 5487FB8/07 -
RF Accessories
N_M to SMA_F Straight Converter ( A )
Digi-Key Part NumberADP-SMAF-NM-NDManufacturerRF SolutionsManufacturer Product NumberADP-SMAF-NMDescriptionCONN ADAPT SMA JACK TO N PLUGDetailed DescriptionAdapter Coaxial Connector SMA Jack, Female Socket To N Plug, Male Pin 50OhmSKU: 5487FB8/08 -
Arduino
Arduino BMP180 Barometric Pressure Sensor Board
- It contains the I2C interface.
- its maximum I2C speed is 3.5Mhz.
- this sensor consists of very low noise which is up to 0.02 hPa or 17cm.
- Its size is 13 x 10 mm.
- Analog devises BMP180 Barometric Sensor for Electronics low-power consumption is -0.5 microamps at 1Hz.
- its pressure range is 300 hPa to 1100 hPa or (9000m to -500m).
SKU: 5487FB8/19 -
Arduino
IR Infrared Flame Detection Sensor Module
IR Flame Sensor Module infrared Receiver Ignition source detection module This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.
It has the Detect angle of 60 degrees and very sensitive to flame spectrum. It produces the one channel output signal at D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
SKU: 5487FB8/15
OFFICE WORKPLACE
PREPARE YOURSmartphones
-
Diode
RA20H8994M RF Power Amplifiers
Parameter Level Value Unit Supply situation Discontinued Drain Voltage Typ 12.5 V Frequency (Min – Max) 896~941 MHz Output Power 20 W Package H2S Input Power Typ 50 mW Drain Efficiency (Min) 25 % Feature – RoHS Directive Compliant with RoHS (2011/65/EU、(EU) 2015/863) SKU: 5487FB8/25 -
Arduino
Arduino Pro Mini 3.3&5V
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- DC input 5V up to 12V
- Analog Pins: 8, Digital I/Os: 14
- 5V&3V regulator
SKU: 5487FB8/26 -
Arduino
Adafruit HUZZAH32-ESP32
A feature-rich MCU with integrated Wi-Fi and
Bluetooth connectivity for a wide-range
of applications- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth (classic and BLE)
- 4 MByte flash include in the WROOM32 module
SKU: 5487FB8/24