Deals of The Day
RA20H8994M RF Power Amplifiers
| Parameter | Level | Value | Unit |
|---|---|---|---|
| Supply situation | Discontinued | ||
| Drain Voltage | Typ | 12.5 | V |
| Frequency (Min – Max) | 896～941 | MHz | |
| Output Power | 20 | W | |
| Package | H2S | ||
| Input Power | Typ | 50 | mW |
| Drain Efficiency (Min) | 25 | % | |
| Feature | – | ||
| RoHS Directive | Compliant with RoHS （2011/65/EU、(EU) 2015/863） |
Arduino Pro Mini 3.3&5V
Adafruit HUZZAH32-ESP32
A feature-rich MCU with integrated Wi-Fi and
Bluetooth connectivity for a wide-range
of applications
HC-SR04 Ultrasonic Module HC-SR04
The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do. It offers excellent non-contact range detection with high accuracy and stable readings in an easy-to-use package. From 2cm to 400 cm or 1” to 13 feet. It operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically soft materials like cloth can be difficult to detect). It comes complete with ultrasonic transmitter and receiver module.
IR Infrared Obstacle Avoidance Sensor Module
IR Infrared Obstacle Avoidance Sensor Module has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard comparator circuitry does the processing and the green indicator LED comes to life.
The module features a 3 wire interface with Vcc, GND and an OUTPUT pin on its tail. It works fine with 3.3 to 5V levels. Upon hindrance/reflectance, the output pin gives out a digital signal (a low-level signal). The onboard preset helps to fine tune the range of operation, effective distance range is 2cm to 80cm.
433Mhz RF Transmitter and Receiver
433Mhz RF Transmitter Receiver Module best price Pakistan are very cheap and you can use them with any microcontroller (MCU). Which is used in Remote control for cars , or to control simple tasks , like control relay on/off unfortunately I didn’t find What I need , So i decided to write a simple artical about this transceiver and How we can connect it with arduino and program it. These RF modules are very popular among the Arduino tinkerers. The 433MHz is used on a wide variety of applications that require wireless control. This is 433Mhz RF transmitter with receiver kit for Arduino ARM MCU wireless
DHT11 Temperature and Humidity Sensor
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±1°C and ±1%
2SC2782 VHF BAND POWER AMPLIFIER
Specifications:
N_M to SMA_F Straight Converter ( A )
|
Digi-Key Part Number
|
ADP-SMAF-NM-ND
|
|
|
Manufacturer
|
RF Solutions
|
|
|
Manufacturer Product Number
|
ADP-SMAF-NM
|
|
|
Description
|
CONN ADAPT SMA JACK TO N PLUG
|
|
|
Detailed Description
|
Adapter Coaxial Connector SMA Jack, Female Socket To N Plug, Male Pin 50Ohm
|
|
Arduino BMP180 Barometric Pressure Sensor Board
Breadboard Power Supply Module 3.3V 5V
Brand new & high quality
Breadboard power supply module, compatible with 5 V, 3.3 V
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
BNCM_RG223 Straight Cable Crimp Connector for RG223
BNC Male to BNC Male Cable Using RG223 Coax
PE3087 is a BNC male to BNC male cable using RG223 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2.
Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3087 BNC male to BNC male cable assembly is constructed with RG223 coax and the maximum VSWR is 1.4:1.
PIC16C711-JW(PIC Microcontroller)
| Digi-Key Part Number | PIC16C711/JW-ND | |
|---|---|---|
| Manufacturer |
Microchip Technology |
|
| Manufacturer Part Number | PIC16C711/JW | |
| Description | IC MCU 8B 1.75KB EPROM/UV 18CDIP | |
| Detailed Description |
PIC PIC® 16C Microcontroller IC 8-Bit 20MHz 1.75KB (1K x 14) EPROM, UV 18-CERDIP |
Popular Categories this Week
-
Diode
RA20H8994M RF Power Amplifiers
Parameter Level Value Unit Supply situation Discontinued Drain Voltage Typ 12.5 V Frequency (Min – Max) 896～941 MHz Output Power 20 W Package H2S Input Power Typ 50 mW Drain Efficiency (Min) 25 % Feature – RoHS Directive Compliant with RoHS （2011/65/EU、(EU) 2015/863） SKU: 5487FB8/25 -
Arduino
Arduino Pro Mini 3.3&5V
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- DC input 5V up to 12V
- Analog Pins: 8, Digital I/Os: 14
- 5V&3V regulator
SKU: 5487FB8/26 -
Arduino
Adafruit HUZZAH32-ESP32
A feature-rich MCU with integrated Wi-Fi and
Bluetooth connectivity for a wide-range
of applications- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth (classic and BLE)
- 4 MByte flash include in the WROOM32 module
SKU: 5487FB8/24 -
Arduino
HC-SR04 Ultrasonic Module HC-SR04
The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do. It offers excellent non-contact range detection with high accuracy and stable readings in an easy-to-use package. From 2cm to 400 cm or 1” to 13 feet. It operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically soft materials like cloth can be difficult to detect). It comes complete with ultrasonic transmitter and receiver module.
SKU: 5487FB8/02
Headphones
-
Diode
RA20H8994M RF Power Amplifiers
Parameter Level Value Unit Supply situation Discontinued Drain Voltage Typ 12.5 V Frequency (Min – Max) 896～941 MHz Output Power 20 W Package H2S Input Power Typ 50 mW Drain Efficiency (Min) 25 % Feature – RoHS Directive Compliant with RoHS （2011/65/EU、(EU) 2015/863） SKU: 5487FB8/25 -
Arduino
Arduino Pro Mini 3.3&5V
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- DC input 5V up to 12V
- Analog Pins: 8, Digital I/Os: 14
- 5V&3V regulator
SKU: 5487FB8/26 -
Arduino
Adafruit HUZZAH32-ESP32
A feature-rich MCU with integrated Wi-Fi and
Bluetooth connectivity for a wide-range
of applications- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth (classic and BLE)
- 4 MByte flash include in the WROOM32 module
SKU: 5487FB8/24
Smartphones & Tablets
-
Arduino
Light Sensor Module Optical Photosensitive LDR Module LM393
The module is useful for detecting the presence of light. The module has two LEDs, one for power and one for output of the comparator. In this configuration, the circuit detects if the light exceeds a certain threshold.
SKU: 5487FB8/23 -
Diode
RA20H8994M RF Power Amplifiers
Parameter Level Value Unit Supply situation Discontinued Drain Voltage Typ 12.5 V Frequency (Min – Max) 896～941 MHz Output Power 20 W Package H2S Input Power Typ 50 mW Drain Efficiency (Min) 25 % Feature – RoHS Directive Compliant with RoHS （2011/65/EU、(EU) 2015/863） SKU: 5487FB8/25 -
RF Accessories
USR-TCP232-T2
Serial to Ethernet Converter Modules | Ethernet UART Modules
Serial to ethernet converter modules USR-TCP232-T2 can transmit data transparently between TCP/IP and TTL, and it can also be applied in RS232/ RS485 by level shift circuit.
● Based on Cortex-M0 core.
● Pin type.
● Low Power, fast-speed and high-efficiency.
● Supports TCP server/client, UDP server/client
● Web page configuration / DHCP & DNS
● Virtual COMSKU: 5487FB8/41 -
Arduino
Arduino Pro Mini 3.3&5V
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- DC input 5V up to 12V
- Analog Pins: 8, Digital I/Os: 14
- 5V&3V regulator
SKU: 5487FB8/26 -
RF Accessories
USR-WIFI232-T
Introduction of Wireless WiFi Modules
The Wireless WiFi Modules, used for data transparent transmission. USR-WIFI232-T wifi module can connect with serial device for data transmission. It can send data from UART to WIFI in TCP client, TCP server and UDP mode.
Serial AT commands Settings
User can set parameter by module itself without going through another computer to configure. This setting method is used in the following situation: user have to configure IP address and destination IP address on site. AT command can meet the demand. After MCU connects serial server module by TTL (UART), MCU can configure setting by AT command.
SKU: 5487FB8/42
Recommendation For You
View All Recommendations-
Diode
RA20H8994M RF Power Amplifiers
Parameter Level Value Unit Supply situation Discontinued Drain Voltage Typ 12.5 V Frequency (Min – Max) 896～941 MHz Output Power 20 W Package H2S Input Power Typ 50 mW Drain Efficiency (Min) 25 % Feature – RoHS Directive Compliant with RoHS （2011/65/EU、(EU) 2015/863） SKU: 5487FB8/25 -
Arduino
Arduino Pro Mini 3.3&5V
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- DC input 5V up to 12V
- Analog Pins: 8, Digital I/Os: 14
- 5V&3V regulator
SKU: 5487FB8/26 -
Arduino
Adafruit HUZZAH32-ESP32
A feature-rich MCU with integrated Wi-Fi and
Bluetooth connectivity for a wide-range
of applications- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth (classic and BLE)
- 4 MByte flash include in the WROOM32 module
SKU: 5487FB8/24 -
Arduino
HC-SR04 Ultrasonic Module HC-SR04
The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do. It offers excellent non-contact range detection with high accuracy and stable readings in an easy-to-use package. From 2cm to 400 cm or 1” to 13 feet. It operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically soft materials like cloth can be difficult to detect). It comes complete with ultrasonic transmitter and receiver module.
SKU: 5487FB8/02 -
Arduino
IR Infrared Obstacle Avoidance Sensor Module
IR Infrared Obstacle Avoidance Sensor Module has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard comparator circuitry does the processing and the green indicator LED comes to life.
The module features a 3 wire interface with Vcc, GND and an OUTPUT pin on its tail. It works fine with 3.3 to 5V levels. Upon hindrance/reflectance, the output pin gives out a digital signal (a low-level signal). The onboard preset helps to fine tune the range of operation, effective distance range is 2cm to 80cm.
SKU: 5487FB8/04 -
Arduino
433Mhz RF Transmitter and Receiver
433Mhz RF Transmitter Receiver Module best price Pakistan are very cheap and you can use them with any microcontroller (MCU). Which is used in Remote control for cars , or to control simple tasks , like control relay on/off unfortunately I didn’t find What I need , So i decided to write a simple artical about this transceiver and How we can connect it with arduino and program it. These RF modules are very popular among the Arduino tinkerers. The 433MHz is used on a wide variety of applications that require wireless control. This is 433Mhz RF transmitter with receiver kit for Arduino ARM MCU wireless
SKU: 5487FB8/05 -
Arduino, Servers
DHT11 Temperature and Humidity Sensor
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±1°C and ±1%SKU: 5487FB8/06 -
Printers
2SC2782 VHF BAND POWER AMPLIFIER
Specifications:
- Rise Fall time: ns
- Max input current: mA
- Input voltage: +5VDC ±0.5VDC
- OSC series oscillators fit into a 14-pin DIP socket P/N 676385, below left
- Frequency stability ±100ppm
- Operating temperature: 0°C to 70°C Output load TTL: 10 TTL max.
SKU: 5487FB8/07
