CC2500 2.4Ghz
- Low power consumption.
- Operating Range: 30 meters
- Integrated bit synchronizer.
- Integrated IF and data filters.
- High sensitivity (type -104dBm)
- Programmable output power -20dBm~1dBm
- Operation temperature range : -40~+85 deg C
- Operation voltage: 1.8~3.6 Volts.
- Available frequency at : 2.4~2.483 GHz
₨210.00
| Technical | |
| Digital I/O Type | 3.3V TTL |
| IC used | CC2500 |
| Peripherals | Integrated analog temperature sensor |
| Sensitivity | -104dBm |
| Frequency | 2.4~2.483 GHz |
|
Features |
|
| Other | Excellent receiver selectivity and blocking performance, Digital RSSI output |
| Wireless | |
| Modulation | OOK, 2-FSK, GFSK, and MSK supported |
| Power Output | -20dBm~1dBm |
| Communications | |
| Communication Interface | 4-pin hardware SPI |
| Data Transfer Rate | 1.2 to 500 kBaud |
| Power Supply | |
| Operating Voltage | 1.8~3.6 V |
| Operating Current | 20mA in RX, 400nA SLEEP mode |
| Power | 75mA |
| Physical | |
| Connectors | 1 x 8pins Header |
| Package Contains | 1 x 2.4 Ghz CC2500 RF Transreceiver |
| Range | 30m |
| Operating Temperature | -40°C to +85°C |
Based on 0 reviews
Be the first to review “CC2500 2.4Ghz”
Related products
-
RF Accessories
SX1278 LoRa Module 433M 10KM
This LoRa 433MHz module designed by AI-THINKER, which based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa™ modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa™ Modulation technology in anti-blocking and selection also has obvious advantages, to solve the traditional design can not take into account the distance, interference and power consumption.
SKU: NF-NF_FLG-1-3 -
RF Accessories
BNCM_RG223 Straight Cable Crimp Connector for RG223
BNC Male to BNC Male Cable Using RG223 Coax
PE3087 is a BNC male to BNC male cable using RG223 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2.
Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3087 BNC male to BNC male cable assembly is constructed with RG223 coax and the maximum VSWR is 1.4:1.
SKU: 5487FB8/11 -
RF Accessories
LORA SX1276
- LoRa Modem
- 168dB maximum link budget
- +20dBm – 100 mW constant RF output vs. V supply
- +14dBm high efficiency PA
- Programmable bit rate up to 300kbps
- High sensitivity: down to -148dBm
- Bullet-proof front end: IIP3 = -11dBm
- Excellent blocking immunity
- Low RX current of 9.9mA, 200nA register retention
- Fully integrated synthesizer with a resolution of 61Hz
- FSK, GFSK, MSK, GMSK, LoRa and OOK modulation
- Built-in bit synchronizer for clock recovery
- Preamble detection
- 127dB Dynamic Range RSSI
- Automatic RF Sense and CAD with ultra-fast AFC
- Packet engine up to 256 bytes with CRC
- Built-in temperature sensor and low battery indicator
SKU: NF-NF_FLG-5
There are no reviews yet.