LORA SX1261DVK1BAS
- Based on SX1261
- PCB Layers: 2
- 32MHz Ref Clock: XTAL
- Region: Europe
- Frequency Band: 868 MHz
- Tx Out Power: 14 dBm
- PCB Version Number: E406V03A
- RF Matching: RF Switch
- Single RF Module Part Number: SX1261MB1BAS
₨8,990.00
Based on 0 reviews
Be the first to review “LORA SX1261DVK1BAS”
Related products
-
RF Accessories
Lora Module 1278
- LoRaTM Modem 168dB maximum link budget
- +20dBm – 100mW constant RF output vs. V supply
- +14dBm high efficiency PA
- Programmable bit rate up to 300kbps
- High sensitivity: down to -148dBm
- Bullet-proof front end: IIP3 = -11dBm
- Excellent blocking immunity
- Low RX current of 9.9mA, 200nA register retention
- Fully integrated synthesizer with a resolution of 61Hz
- FSK, GFSK, MSK, GMSK, LoRa and OOK modulation
- Built-in bit synchronizer for clock recovery
- Preamble detection
- 127dB Dynamic Range RSSI
- Automatic RF Sense and CAD with ultra-fast AFC
- Packet engine up to 256 bytes with CRC
- Built-in temperature sensor and low battery indicator
SKU: NF-NF_FLG-1 -
RF Accessories
USR-TCP232-T2
Serial to Ethernet Converter Modules | Ethernet UART Modules
Serial to ethernet converter modules USR-TCP232-T2 can transmit data transparently between TCP/IP and TTL, and it can also be applied in RS232/ RS485 by level shift circuit.
● Based on Cortex-M0 core.
● Pin type.
● Low Power, fast-speed and high-efficiency.
● Supports TCP server/client, UDP server/client
● Web page configuration / DHCP & DNS
● Virtual COMSKU: 5487FB8/41 -
RF Accessories
BNC_M Right Angle Cable Crimp Connector for RG223
This is a BNC plug connector for cable application. The RG142B, RG223, and RG400 etc. are the suitable cables for this connector. We suggest that the center contact has to be assemblied with the cable inner conductor by soldering, and the ferrule needs to be clamped on the cable for transmission and fixing.
SKU: 5487FB8/39 -
RF Accessories
SX1278 LoRa Module 433M 10KM
This LoRa 433MHz module designed by AI-THINKER, which based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa™ modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa™ Modulation technology in anti-blocking and selection also has obvious advantages, to solve the traditional design can not take into account the distance, interference and power consumption.
SKU: NF-NF_FLG-1-3
There are no reviews yet.