BNCM_RG223 Straight Cable Crimp Connector for RG223
19 in stock
BNC Male to BNC Male Cable Using RG223 Coax
PE3087 is a BNC male to BNC male cable using RG223 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2.
Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3087 BNC male to BNC male cable assembly is constructed with RG223 coax and the maximum VSWR is 1.4:1.
₨65.00
19 in stock
-
RF Accessories
BNCM_RG223 Straight Cable Crimp Connector for RG223
BNC Male to BNC Male Cable Using RG223 Coax
PE3087 is a BNC male to BNC male cable using RG223 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2.
Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3087 BNC male to BNC male cable assembly is constructed with RG223 coax and the maximum VSWR is 1.4:1.
SKU: 5487FB8/11 -
Arduino
Soil Hygrometer Detection Module Soil Moisture Sensor
soil humidity module to the environmental humidity is the most sensitive, generally used to detect soil moisture.
module in soil moisture can not reach the setting threshold, DO mouth output high level, when soil moisture more than setting threshold, module D0 output low level;
small plate digital output D0 can be directly connected with the single chip microcomputer, through the single chip microcomputer to detect the high and low level, thus to detect soil moisture;SKU: 5487FB8/29
Key Specifications
| Connector Series 1 | BNC |
| Connector Gender 1 | Male |
| Connector Polarity 1 | Standard |
| Connector Angle 1 | Straight |
| Connector Mount Method 1 | None |
| Connector Impedance 1 | 50 |
| Connector Series 2 | BNC |
| Connector Gender 2 | Male |
| Connector Polarity 2 | Standard |
| Connector Angle 2 | Straight |
| Connector Mount Method 2 | None |
| Connector Impedance 2 | 50 |
| RF Cable Part Number | RG223/U |
| RF Cable Type | RG223 |
| RF Cable Impedance | 50 |
Technical Specifications
| Brand | Apple |
| Item Height | 18 Millimeters |
| Item Width | 31.4 Centimeters |
| Screen Size | 13 Inches |
| Item Weight | 1.6 Kg |
| Product Dimensions | 21.9 x 31.4 x 1.8 cm |
| Item model number | MF841HN/A |
| Processor Brand | Intel |
| Processor Type | Core i5 |
| Processor Speed | 2.9 GHz |
| RAM Size | 8 GB |
| Hard Drive Size | 512 GB |
| Hard Disk Technology | Solid State Drive |
| Graphics Coprocessor | Intel Integrated Graphics |
| Graphics Card Description | Integrated Graphics Card |
| Hardware Platform | Mac |
| Operating System | Mac OS |
| Average Battery Life (in hours) | 9 |
Based on 3 reviews
Add a review
Related products
-
RF Accessories
SX1278 LoRa Module 433M 10KM
This LoRa 433MHz module designed by AI-THINKER, which based on the chip SX1278. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa™ modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa™ Modulation technology in anti-blocking and selection also has obvious advantages, to solve the traditional design can not take into account the distance, interference and power consumption.
SKU: NF-NF_FLG-1-3 -
RF Accessories
CC2500 2.4Ghz
- Low power consumption.
- Operating Range: 30 meters
- Integrated bit synchronizer.
- Integrated IF and data filters.
- High sensitivity (type -104dBm)
- Programmable output power -20dBm~1dBm
- Operation temperature range : -40~+85 deg C
- Operation voltage: 1.8~3.6 Volts.
- Available frequency at : 2.4~2.483 GHz
SKU: NF-NF_FLG-3 -
-
RF Accessories
USR-WIFI232-T
Introduction of Wireless WiFi Modules
The Wireless WiFi Modules, used for data transparent transmission. USR-WIFI232-T wifi module can connect with serial device for data transmission. It can send data from UART to WIFI in TCP client, TCP server and UDP mode.
Serial AT commands Settings
User can set parameter by module itself without going through another computer to configure. This setting method is used in the following situation: user have to configure IP address and destination IP address on site. AT command can meet the demand. After MCU connects serial server module by TTL (UART), MCU can configure setting by AT command.
SKU: 5487FB8/42
Peter Wargner –
Fusce vitae nibh mi. Integer posuere, libero et ullamcorper facilisis, enim eros tincidunt orci, eget vestibulum sapien nisi ut leo. Cras finibus vel est ut mollis. Donec luctus condimentum ante et euismod.
Peter Wargner –
Anna Kowalsky –
Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Suspendisse eget facilisis odio. Duis sodales augue eu tincidunt faucibus. Etiam justo ligula, placerat ac augue id, volutpat porta dui.
Anna Kowalsky –
John Doe –
Sed id tincidunt sapien. Pellentesque cursus accumsan tellus, nec ultricies nulla sollicitudin eget. Donec feugiat orci vestibulum porttitor sagittis.
John Doe –